Automatic feeding and ultrasonic cutting
Material travels from the reel holder through the feed path to the ultrasonic cutting assembly for repeated cuts at the set length.
← Tape & webbing cutting
HESPER / ULTRASONIC TAPE CUTTING
Compact Automatic Ultrasonic Tape Cutter
Ultrasonic cut-to-length processing · Automatic feeding · Chinese/English LCD
Side view: reel holder, LCD control panel, cutting assembly and separate ultrasonic generator
Open image to enlarge ↗CXY-100CW / ULTRASONIC CUTTING
Set the length.
Feed and cut ultrasonically.
Automatic feeding and ultrasonic cut-to-length processing for webbing, ribbon, headbands, hook-and-loop tape and elastic cord. The Chinese/English LCD interface provides length, speed and total-quantity settings with automatic counting. Adjustable guides and a material-out stop and alarm support repeated cutting jobs.
- Model
- CXY-100CW
- Cutting method
- Ultrasonic cutting
- Supply voltage
- 220 V
Share the material, width or diameter, thickness and finished length to confirm suitability.
Or email us directly: Liangchengfeng124@gmail.com
01 / MACHINE FEATURES
Guide, count and cut ultrasonically.
Chinese/English LCD controls
Switch between Chinese and English, set cut length, speed and total quantity, and track the accumulated piece count.
Adjustable guides for multiple strips
Multiple guide stops help keep material aligned. Several strips can be arranged for cutting together, depending on their widths and the guide setup.
Material-out stop and alarm
Material detection stops the machine and triggers an alarm when the material runs out.
Digital ultrasonic generator
The separate ultrasonic generator has a digital display and buttons for adjusting parameters.
Automatic resonance tracking
The ultrasonic generator tracks the resonant frequency in real time and adjusts automatically.
02 / CONFIGURATION
Machine configuration
Confirm material suitability and installation space using your sample, material dimensions and required edge finish.
| Model | CXY-100CW |
|---|---|
| Process | Automatic feeding and ultrasonic cut-to-length processing |
| Supply voltage | 220 V |
| Listed dimensions | 650 × 480 × 1150 mm |
| Operator interface | Chinese/English LCD |
| Programmable settings | Cut length, speed, total quantity and automatic counting |
| Material guides | Multiple adjustable guide stops |
| Material-out detection | Automatic stop and alarm |
| Ultrasonic generator | Digital display, button controls and automatic resonance tracking |
03 / MATERIALS
For webbing, ribbon and elastic cord.
Suitability and edge finish depend on material composition, dimensions and settings. Provide an actual sample for confirmation.
WebbingRibbonHeadbandsHook-and-loop tapeElastic cordNylon tapeElastic bandsZipper tape
Prepare an enquiry for this machine.
Include a material sample, cut dimensions, edge-finish requirements and target output.
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Material & dimensions
Provide material composition, width or diameter, thickness, stretch and an actual sample.
Length & edge finish
Specify minimum and typical cut lengths, required tolerance, edge finish and the number of strips to cut together.
Output & site conditions
Include target output, site power and compressed-air conditions to confirm ultrasonic cutting suitability with a material sample.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com