Roll specification
Include material, thickness, stretch, web width, roll diameter and roll weight.
← Roll-to-sheet cutting
HESPER / FILM CUT-TO-LENGTH
Automatic Film Cut-to-Length Machine
Automatic roll feeding · Cut-to-length cross-cutting · Chinese/English controls
Oblique machine view: control panel, cutting assembly and separate roll holder
Open image to enlarge ↗ROLL FEEDING / CUT-TO-LENGTH
Feed from the roll.
Cut to the set length.
Automatic feeding and cut-to-length cross-cutting for PVC film, PET film, bubble wrap and nonwoven rolls. The Chinese/English LCD control panel provides settings for cut length, feed speed and quantity. The machine includes a pressure-adjustable feed roller, material guides and a separate floor-standing roll holder.
- Process
- Automatic feeding and cross-cutting
- Cut length
- Adjustable
- Supply voltage
- 220 V
Share the material type, thickness, width and finished length to confirm suitability.
Or email us directly: Liangchengfeng124@gmail.com
01 / MODEL RANGE
Choose a model for your material width.
Ten width specifications from 100 to 1500 mm. Share your material width and cutting requirements to confirm the right model.
| Model | Width specification |
|---|---|
| CXY-100G | 100 mm |
| CXY-200G | 200 mm |
| CXY-300G | 300 mm |
| CXY-400G | 400 mm |
| CXY-500G | 500 mm |
| CXY-600G | 600 mm |
| CXY-800G | 800 mm |
| CXY-1000G | 1000 mm |
| CXY-1200G | 1200 mm |
| CXY-1500G | 1500 mm |
02 / MACHINE FEATURES
Guide, feed and cut to length.
Bilingual LCD controls
Set cut length, feed speed and batch quantity using the LCD panel and keypad. Switch between English and Chinese on the control panel.
Heat-treated steel blade
A vacuum heat-treated steel blade works with the feed system to cross-cut roll material to the selected length.
Motor-driven feed system
The motor-driven feed system advances material according to the programmed cut length for repeat cut-to-length cycles.
Adjustable feed roller
A polyurethane feed roller grips the material. Adjustment screws at both ends let the operator set the roller pressure.
Tension and alignment guides
The tension guide and adjustable material guides help keep the material aligned as it enters the cutting section.
Floor-standing roll holder
A separate floor-standing holder supports the material roll. Bearing supports allow the roll to turn as material is fed into the machine.
Cabinet cooling fans
Cooling fans ventilate the machine cabinet to help dissipate heat during operation.
Fused power inlet
A three-pin power inlet provides a protective earth connection and an integrated fuse.
03 / CONFIGURATION
Machine configuration
Set cut length, feed speed and quantity on the control panel, then adjust roller pressure and guide position for the material.
| Process | Automatic feeding and cut-to-length cross-cutting |
|---|---|
| Supply voltage | 220 V |
| Cut length | Adjustable |
| Controls | Chinese/English LCD display and numeric keypad |
| Programmable settings | Cut length, feed speed and quantity |
| Feed roller | Polyurethane roller with adjustable pressure |
| Material support | Separate floor-standing roll holder with bearings |
| Blade | Vacuum heat-treated steel blade |
| Cooling | Cooling fans |
| Power inlet | Grounded three-pin inlet with integrated fuse |
04 / MATERIALS
For film, fabric and packaging rolls.
Confirm suitability for the material thickness, width, finished length and required edge finish.
PVC filmPET filmBubble wrapNonwoven fabricEVA foamReflective filmLeatherElectrical insulating paperKnitted fabricEPE foam
Prepare an enquiry for this machine.
Include a material sample, roll dimensions, cut dimensions and target output.
MATERIAL CHECK & ENQUIRY
Confirm the material.
Then the configuration.
Thickness range, minimum dimensions and working rate depend on the material.
Cut-to-length requirements
Specify feed width, minimum and typical cut lengths, and required tolerance.
Output & sample
Provide material photos, finished-part requirements and target output to confirm suitability and discuss a cutting trial.
Selection & delivery enquiries
Confirm lead time, packing, shipping, installation support and warranty terms with your enquiry.
Liangchengfeng124@gmail.com